We use cookies to ensure you get the best experience on our website.
They are used only to remember your language and display preferences.
No personal data is stored in cookies.
If you continue to use this site, you agree.
Know more
Ok
Détecteur de présence Blanc encastré 360° 2 canaux détection carrée 64m² IP40 200W Led
Détecteur de présence Blanc encastré 360° 2 canaux détection carrée 64m² IP40 200W Led
Non contractual photo
We will be closed for inventory on Wednesday 28/05 and Friday 30/05
Détecteur de présence Blanc encastré 360° 2 canaux détection carrée 64m² IP40 200W Led
The presence detector thePrema S360 - 101 E UP WH is suitable for individual offices, well - defined open - plan offices as well as corridors with a lot of natural light and demanding brightness measurement.
It is designed for automatic presence and brightness - dependent lighting control (230 V AC contact) and presence - dependent HVac control (potential - free contact).
With its 360° square detection area, thePrema S360 - 101 E UP WH provides optimum room coverage without unnecessary overlapping or uncovered areas. It guarantees reliable motion detection anywhere in the room.
Flush ceiling mounting, surface mounting possible with housing 907 0 912 - 110A WH
Mixed light detection (suitable for all types of lighting)
Preset for immediate start - up
Setting of brightness threshold and time delays via potentiometers or remote controls theSenda P or theSenda B
Adjustment of the detection sensitivity via remote controls theSenda P or theSenda B
Automatic or semi - automatic operation (activation by push button or switch, automatic triggering depending on absence or brightness) Reduction of the time delay on triggering in the event of short - term presence (passage)
Possibility of connecting a push button or switch for manual switching Test mode to check function and detection area
Local or corridor mode, eco or eco plus
Parallel master / master or master / slave connection of up to 10 detectors to extend the detection area.
TECHNICAL FEATURES
Operating voltage: 110 - 230 V AC + 10% / - 15% 50 - 60 Hz
Standby power consumption: approx. 0.1W
Mounting height 2 to 3 m (up to 3.5 m possible)
Detection range up to 5 x 5m (25m²) for a seated person and up to 8 x 8 m (64 m²) for a moving person
Threshold lux: 5 to 3,000lux, preset = 300lux
Lighting time delay from 10 s to 60 min, presetting = 10 min, pulse function possible
Lighting channel switching capacity: 10 A / 230V AC (cos phi = 1)
Maximum loads
halogen or incandescent lamps: 2,300W
fluorescent tubes compensated or not: 1,150VA
tubes with electronic ballast: 16 x 54 / 58 W, 24 x 35 / 36 W
compact lamps : 1 150VA
LED < 2 W: 60 W, LED > 2 W: 600 W
Temporization on switch - off (HVac): 10 s to 120 min (OFF), preset = 10 min
Temporization on switch - on (HVac): 0 s to 10 min (ON), room monitoring, preset = 0 s
Breaking capacity: 50W / 50VA (maximum 2 A)
Minimum load: 10 mV / 10mA
Ingress protection IP40 Screw terminal connection, maximum cable cross - section of 2 x 2.5 mm²
