We use cookies to ensure you get the best experience on our website.
They are used only to remember your language and display preferences.
No personal data is stored in cookies.
If you continue to use this site, you agree.
Know more
Ok
Détecteur de présence Blanc encastré 360° 2 canaux 24m IP54 200W Led
Détecteur de présence Blanc encastré 360° 2 canaux 24m IP54 200W Led
Non contractual photo
Détecteur de présence Blanc encastré 360° 2 canaux 24m IP54 200W Led
TheRonda P360 - 101 M UP WH presence (and motion) detector is suitable for automatic presence and brightness control of lighting (230 V AC contact) and presence - dependent HVac control (potential - free contact).
The 360° detection area of up to 25m in diameter (452m²) can be further expanded with master / slave mounting.
With the master / master parallel connection, the lighting conditions in the detection area of each device can be configured individually. This is particularly interesting if, for example, you want to compensate for differences in brightness between glass facades and the interior of landscaped offices.
It is intended for flush ceiling mounting.
However, surface mounting is possible using the FRAME 110A WH 9070912 housing.
Mixed light detection (suitable for all types of lighting).
Preset for immediate operation.
Light threshold and time delay settings as well as detection sensitivity can be changed with theSenda B or theSenda P remote controls.
Brightness learning function.
Reduction of the time delay at triggering in case of short - term presence (passage)
Possibility of connecting a push button or switch for manual switching
Pulse function for staircase timer control
Test mode for checking operation and detection area
Automatic or semi - automatic operation (push - button or switch activation, automatic triggering depending on absence or brightness)
Possibility to limit the detection area by shutter provided.
TECHNICAL FEATURES
Operating voltage from 110 to 230 V 50 to 60 Hz
Consumption: approx. 0.1W
Mounting height from 2 to 3.5 m; possible up to 10m
Brightness adjustment from 30 to 3000lux, preset = 300lux
Lighting time delay from 10 s to 60 min, presetting = 10 min, pulse function possible
Light channel switching capacity: 10 A / 230 V AC (cos phi = 1)
Maximum loads:
halogen or incandescent lamps: 2300W
fluorescent tubes compensated or not, compact lamps: 1150VA
tubes with electronic ballast: 16 x 54 / 58 W, 24 x 35 / 36 W
LED < 2 W: 60 W, LED > 2W: 180 W
HVac triggering timing: 10 s to 120 min (OFF), preset = 10min
Temporization at HVac switch - on: 0 s to 10 min (ON), preset = 0 s
Cutoff power (HVac): 50 W / 50VA (maximum 2 A)
IP54 protection degree
Screw terminal connection, maximum cable cross - section of 2 x 2.5 mm²
